Lashing Tangs

$75.00$85.00

Lashing Tangs are the perfect mast hardware for terminating synthetic shrouds, running backstays, and other high-tension fittings.  Made from 1/2″ thick, powder-coated 6061 T6 aluminum alloy, the lashing holes are smoothly radiused to accept loops or lashings.  1/2″ bolt hole can be drilled out to 5/8″ or accept a bushing for smaller fasteners.

Easily retrofit Dyneema rigging onto boats that once had wire shrouds with a minimum of fuss, or incorporate easily into new designs.

This is what self-sufficient sailors have been waiting for all their lives.  A bombproof mast tang that will accept a lashing or soft loop without chafing the line through or breaking the bank.  Those converting to light, strong, and economical synthetic standing rigging in favor of heavy, corrosion-prone, expensive stainless steel wire rope will find these tangs not only elegant and useful, but easier to install and use than any other alternative.

Made from powder-coated 6061 T6 aluminum plate a full half-inch thick, with smoothly radiused lashing holes and the optimum angle transition from mast to shroud.  Use a single for cap shrouds, intermediates, and runners, or a double for lowers.  The half-inch bolt hole can be drilled out as big as 5/8″ without compromising strength, or bushed to accept smaller diameter fasteners.

type

single, double

Shopping Cart
Scroll to Top